ГлавнаяТоварыБарьеры D5000D5264S

D5264S

 623.00

Одноканальный; 4/20 мА искробезопасный барьер для ЭПП; SIL 2

Заказать в 1 клик
SKU D5264S

    Описание

    The single channel DIN Rail Load Cell/Strain Gauge Bridge Isolating Converter D5264S module is a unit suitable for applications requiring SIL 2 level (according to IEC 61508:2010) in safety related systems for high risk industries.

    The unit acts as a galvanically isolated interface installed between a PLC/DCS in Safe Area and a load cell (or a group of load cells) in Hazardous Area. Up to four 350 ? load cells; or five 450 ? load cells; or ten 1000 ? load cells can be connected in parallel.

    It provides a fully floating power supply voltage with remote sensing capabilities to load cells located in Hazardous Area and converts the mV signal from the load cell into a 0/4-20 mA; providing both current source and sink capabilities. The module is also provided with PhotoMOS alarm output.

    A modbus output is also provided to interface the PLC/DCS using digital communication.

    Mounting on standard DIN-Rail; with or without Power Bus; in Safe Area or in Zone 2.

    Характеристики

    • SIL 2 / SC 3

    • Input from Zone 0

    • Installation in Zone 2

    • Strain Gauge Bridge Isolated Converter

    • Up to four 350 ? load cells in parallel

    • 0/4-20 mA sink/source output current

    • Modbus RTU RS-485 for monitor & configuration

    • Field Automatic Calibration

    • Fully programmable operating parameters

    • High Accuracy; ?P controlled A/D converter

    • Three port isolation; Input/Output/Supply

    Каналы

    1

    Уровень SIL

    SIL 2

    Колличество каналов

    1

    Уровень SIL

    SIL 2

    Монтаж на DIN-рейке

    Да

    HART протокол

    Нет